TT EdgeGlow

Side emitting large core fiber optic cable with Teflon® outer jacket

OptiCore FiberJack

For use with EFO44 and EFO33 Illuminators. Each OptiCore® fiber tail includes a FiberJack connector on one end and a fixture connector (bayonet) on the other end. This method of fiber connection provides the highest light output with an EFO44 or EFO33 Illuminator. No cutting, harnessing, or ferruling required, just plug in and go. Available in standard lengths of 10’ or in custom lengths from 5’ to 25’. Minimum bend radius is 8x inner diameter.

OptiCore Large Core Fiber

End-emitting large core plastic optical fiber for use with EFO illuminators. Factory FiberJack(TM) assemblies are strongly recommended, see below. Use per foot pricing as an adder for Fiberjacks in excess of 10’ lengths. Minimum bend radius is 8x inner diameter.

TT EdgeGlow

Side emitting large core fiber optic cable with Teflon® outer jacket

FiberSpots

End emitting stranded fiber optic cable. Can be used with all stranded fiber fixtures for downlighting, case lighting, step lighting and for creating decorative patterns of light. Recommended in lengths up to 30’. Allow 3’ to 5’ service loop per end. Can be cut, harnessed and ferruled at factory or in field. Use LB-HK-3 or FS-163 tools for harnessing. Use LB-HK-3, FS-163, or FS-118 tools for ferruling. Minimum bend radius is 4x outer diameter. Factor harnessing available upon request. Consult factory.

Fire Rated Jacket Fiber

End emitting fiber optic cable enclosed in a fire-rated outer jacket. Can be used with all stranded fiber fixtures for downlighting, case lighting, step lighting and applications requiring fire-rated cable. Recommended in lengths up to 30’. Allow 3’ to 5’ service loop per end. Can be cut, harnessed, and ferruled at factory or in field. Use LB-HK-3 or FS-163 tools for harnessing. Use LB-HK-3, FS-163, or FS-118 tools for ferruling. Minimum bend radius is 10x outer diameter.

Star Cable Fiber

End emitting fiber optic cable in different diameters to create star ceilings or other points of light that require varying degrees of brightness. Recommended for star ceilings in lengths up to 30’. Allow 3’ to 5’ extra fiber per end. Can be cut and harnessed at factory or in field. Use LB-HK-3 or FS-163 tools for harnessing. Minimum bend radius is 4x outer diameter.